Polyester fiberboard is a new material in the market, which is similar to the laying of floors and tiles. To a certain extent, it can reduce indoor noise and bring a lot of convenience to life. If you use polyester fiber board for installation, you must pay attention to the installation gap, which should not be too large, and allow a 1 mm error. The rest of the details should be determined according to the indoor decoration. The following is the installation method of polyester fiber board, let's take a look!

1, polyester fiber board installation method 1. Preparation

(1) First go to the actual environment for inspection to see if it meets the conditions for resettlement. If not, directly modify and build the foundation artificially, and the basic framework must be done well.

(2) Before construction, pay attention to the board selection and layout, pay attention to the slight color difference, and see if the difference is large; if not, find the center point of the veneer, draw a cross line with the utensils, choose the method of laying bricks, and start from the center point When laying the board, the master can wear gloves, not only to protect the hands, but also to prevent pollution.

2. Cut the board

(1) Use a steel ruler and a sharp utility knife for corresponding cutting or retouching. Data should be collected early here, and try not to make mistakes, otherwise it will affect the installation process.

(2) If you want to reduce the seam, you can skew the blade inward by 0.5-1mm when cutting, which is convenient for the edge of the board to connect and reduce the gap. 3. Post

(1) For cement or wood base, benzene-free all-purpose glue or white latex with neoprene as raw material can be selected.

(2) For the base surface of the gypsum board, white latex or cellulose-based wallpaper glue can be used under the premise that it is not easy to be affected by moisture; Surface movement; under the premise of simple or possible damp, you can use all-purpose glue.

(3) Polyester fiber board is a porous material, which is easy to absorb glue, block holes, and affect the sound-absorbing function of the rear cavity; it is recommended to apply glue on one side during construction. This is only suitable for applying glue on the substrate or keel. More than normal, at the same time reinforced with rivets.

Second, the application of fiberboard nails

1. Fiberboard nail is a heat-treated product suitable for the installation of electric tools. Fiberboard nails are used for the connection and fastening between wooden boards and between wooden boards and thin steel plates.

2. Fiberboard nails play a great role in the installation of guide rails, chains, with fish-type expansion installation, and as an alternative to wood screw installation to make furniture, cabinets, etc.; fiberboard nails are optimized from the thread design, pursuing higher drilling speed, and Solve the problem of cracking easily caused in the use of hard wood, and the technical content is high.

To sum up, when installing polyester fiber board, do not blindly construct, first refer to the installation environment, then formulate an installation plan, and finally confirm with the owner before maintenance. Polyester fiberboard is widely used, especially in the decoration industry of big cities. It can be used to beautify the interior layout, increase the grade of decoration, and make people shine.